Horsepower requirement of Motor OMC Outboards:

By US law (US coast guard regulation) a boat up to 20 feet in
length should carry a plate mentioning the maximum horsepower
rating of the vehicle. These motor OMC out boards are available
in different horsepower ratings. Outboards are available in two
stroke and four stroke engines. Depending upon the engine
rating, the other specifications including horsepower of the
vehicle are provided in the brochure. Most of outboards
manufacturers power rate the engine in accordance with the NMMA
procedure using international council on marine industry
associates (ICOMIA) standards 28/83.

Fuel and Lube requirements:

Fuel and lube is one of the primary requirements of motor OMC
outboards and always-correct fuel should be used. Gasoline fuel
comes with an octane rating, and a minimum of 87 octane rating
unleaded gasoline should be preferred if fuel specification is
not provided with the operational manual. Fuel rating
requirements also sometimes depends on the power rating of these
outboards.

Safety Standards:

Safety is one of the biggest aspects of these Motor OMC
outboards. Although every motor OMC outboard manufacturers give
the utmost priority to the safety, a few backfire problems has
been reported and these backfires increases the risk of damaging
engine collector assembly. In case if a break in collector
assembly happens, it may cause serious injuries to the persons.
For avoiding these backfires, a proper voltage electronic and
adequate better battery cables should be maintained.

Proper maintenance of Motor OMC Outboards:

Maintenance schedule should be followed at regular interval as
provided in manual. The recommended grade of lubricants should
be used always and in no case the used lube oil should be
drained in water or earth.

Regular check up of Motor OMC outboards should be carried out to
see

1.The adequate electric wiring is maintained.

2.The water level in battery or efficiency of battery is
maintained.

3.He carburetor is clean and fuel pump is operating properly.

4.Proper quality of fuel is being used.

5.Lubricant level and lubricant quality is maintained and
lubricants are replaced as and when required.

6.Engine tuning is proper and maintained.

7.Gears are in good operating conditions.

8.Brakes are in good operating conditions.

Replacements of parts with genuine parts:

Every motor OMC outboard manufacturers provide a detailed list
of accessories with the vehicle manual. For getting highest
benefit of these motor OMC outboards, the outboards should be
maintained in good conditions by carrying maintenance job at
regular interval and replacing the defected parts by original
genuine parts supplied by the manufacturer. To ensure the
maximum benefit of these motor OMC outboards the practice should
be continued.

About the author:
Trish is the author for http://www.sterndrive.info - Get more
information on <a xhref="http://www.sterndrive.info">Motor OMC
outboard</a>.